Structuralcharacteristics of a small reactor（www.gfanyingfu.com）
Small reactoroperating pressure is higher. The pressure inside the tank is chemical reactionproduced or by a temperature increase and the formation of and pressurefluctuations larger, and sometimes unstable, sudden pressure rise is likely toexceed several times the normal pressure. Therefore, most of the reactionkettle belongs to pressure vessel.
Small reactoroperating temperature is higher, usually chemical reaction needs to be in acertain temperature conditions can be carried out, so the reactor both underpressure and temperature. High temperature methods usually have the following:
1, water heating
When thetemperature is not high enough to be used, the heating system has two kinds ofopen and closed.
2, steam heating
When the heatingtemperature is below 100 degrees Celsius, the steam can be heated by anatmospheric pressure, and the saturated steam is used in the range of 100~180,and the high pressure superheated steam can be used when the temperature ishigher.
3, with other mediaheating
If processrequirements must be in high temperature operation or want to avoid heatingsystem using high pressure, available in other medium instead of water andsteam, such as mineral oil (275 to 300 DEG C) and diphenyl ether mixture(boiling 258 DEG C), molten salt (140 ~ 540 DEG C), liquid lead (melting point327 DEG C).
4, electric heating
The resistance wireis wound on the insulating layer of the reaction vessel, or is arranged on thespecial insulator which is arranged at a certain distance from the reactionvessel, so that a small space gap is formed between the resistance wire and thereaction kettle body.